The brake disc is the friction coupling part of the disc brake. In addition to the strength and stiffness required as a component, it should also have a high and stable friction coefficient as much as possible, as well as appropriate wear resistance, heat resistance, heat dissipation and heat capacity. Now let's talk about the problems that are easy to occur with the brake disc.
If the brake friction lining of the automatic mixer is damaged, the metal lining will retract and squeal due to friction, accompanied by overheating. At this time, we should replace the brake friction lining.
There is a bolt for fixing the brake caliper. If the screw is loose, the brake caliper will be skewed. At this time, the parts and the brake disc will interfere with each other, which will also cause abnormal noise.
The aging and abrasion of the low-pressure rubber pipe, the looseness of the oil pipe joint or the damage of the sealing element at this part are all the reasons for the leakage of the brake fluid. At this time, we need to check the relevant parts, tighten the joint or replace the rubber pipe, sealing element and other parts.
There is a seal ring at the piston of the brake caliper. If the seal ring is worn, the brake fluid will leak out. At this time, we need to replace the seal ring and dust ring.
The above are the problems that are easy to occur with the brake disc of the automatic mixer. After you understand the relevant problems, you should make preparations for prevention. Please come to our website for more attention http://www.qzt12580.com Consult!